There are several reasons why one might choose 100 Mbit instead of 1 Gbit. One reason could be cost - 100 Mbit equipment and services are often more affordable than 1 Gbit. Another reason could be that 100 Mbit may be sufficient for the current needs of the user or organization, and they may not require the higher speed of 1 Gbit. Additionally, in some cases, the infrastructure or hardware in place may not support 1 Gbit speeds, making 100 Mbit a more practical choice. **

The Vodafone Station is capable of delivering 1 Gbit via LAN, but the actual speed may be limited by various factors such as the quality of the Ethernet cable, the network interface card on the connected device, and the network configuration. It is important to ensure that all components in the network chain are capable of supporting 1 Gbit speeds in order to achieve the maximum performance. If the Vodafone Station is only delivering 100 Mbit instead of 1 Gbit via LAN, it may be necessary to troubleshoot and optimize the network setup to achieve the desired speed. **

The Fritzbox may only have a 100 Mbit/s connection instead of 1 Gbit/s due to hardware limitations. The router's internal components, such as the Ethernet ports and processor, may not be capable of supporting gigabit speeds. Additionally, the manufacturer may have chosen to prioritize other features or cost-effectiveness over providing a gigabit connection. As technology advances, newer models of the Fritzbox may offer faster speeds. **

Yes, the Vodafone Station only delivers 100 Mbit via LAN instead of 1 Gbit. This means that the maximum speed that can be achieved when connected via LAN cable is 100 Mbit per second. While this may be slower than a 1 Gbit connection, it should still be sufficient for most typical internet usage scenarios. If higher speeds are required, users may need to consider alternative networking solutions. **

No, a 1 Gbit network cable cannot transmit more than 1 Gbit. The maximum data transfer rate of a network cable is determined by its specifications, and a 1 Gbit cable is designed to handle data transfer speeds up to 1 Gbit per second. While there are technologies that can aggregate multiple network cables to achieve higher data transfer rates, a single 1 Gbit network cable cannot transmit more than 1 Gbit at a time. **

To establish a LAN connection with only 100 Mbit instead of 1 Gbit, you can adjust the settings on your network switch or router to limit the speed to 100 Mbit. This can usually be done through the device's configuration interface by setting the port speed to 100 Mbps instead of auto-negotiation. Additionally, you can use a network cable that is only capable of supporting speeds up to 100 Mbps, such as a Cat5 cable, instead of a Cat5e or Cat6 cable which can support higher speeds. By making these adjustments, you can ensure that your LAN connection operates at the desired 100 Mbit speed. **

There are several reasons why a home network might have a 100 Mbit/s connection instead of a 1 Gbit/s connection. One reason could be cost, as 100 Mbit/s equipment is often less expensive than 1 Gbit/s equipment. Another reason could be that the devices on the network may not require the higher speed, such as older computers or devices that do not support gigabit speeds. Additionally, the infrastructure of the home network, such as the cabling and networking hardware, may not be capable of supporting gigabit speeds. **

The speed of the router is always 100 Mbit/s instead of 1 Gbit/s because it is limited by the hardware capabilities of the router. The router's network interface card (NIC) may only support speeds up to 100 Mbit/s, or it may have older Ethernet ports that are not capable of reaching 1 Gbit/s speeds. Additionally, the router's processing power and memory may not be sufficient to handle the higher data throughput of a 1 Gbit/s connection. Therefore, the router is limited to 100 Mbit/s to ensure stable and reliable network performance. **